Catalog
We make a variety of products right here in the Ozarks. It's
all handmade by us in the USA.
Browse around and let us know if there is anything we can do to serve you.
We now accept
for retail orders
|
Gift Certificates Available! |
| Item #: MAL-A3 or MAL-O2 | ||
|
Carving Mallets
Made from locally grown hardwoods, mainly ash or Osage Orange (also called Hedge or Bois D'arc), these were designed and developed by a master carver friend of ours. Now we're offering them to the public! Area carvers are particularly fond of our Osage Orange mallets for their beauty, uniqueness and exceptional working characteristics. Try one yourself today! Custom sizes / weights are no problem. Just let us know what you want. |
|
|
Price each: Ash (# MAL-A3): Osage Orange(# MAL-O2) |
$ 15.00 $ 20.00 |
|
| Item #: CSH - 3a | ||
|
Cabinet Scraper
Holder If you work with cabinet scrapers to do anything more than the lightest work, this is the tool for you! The cabinet scraper is superior to sanding in removing glue, paint, machine marks and to do smoothing. It gives a fantastic surface ready to finish in a fraction of the time it takes to sand with abrasives. It also gives a true glowing quality to the wood that can't be achieved with sandpaper. The problem with scrapers has been the hand fatique associated with bending the scraper at the right angle to get the most effective cut. This holder jig for the cabinet scraper comes to the rescue! Let it do that job for you and make scraping a joy to use. These holders are hand-made, by us, one at a time. We generally make two different sizes for the two most common sizes of scrapers. The smaller one will hold one up to 4-3/4" long and the larger will accomodate a scraper up to 6" long. If you have different needs, just let us know and we can make one up to fit what you have. As you can see to the left, these will even hold the non-rectangular ones as well! |
|
| Price each (holder only): |
$ 25.00 |
|
| Price each (holder + scraper): | $ 35.00 | |
| Item # Spurtle | |
 |
Spurtle A fantastic little kitchen tool ... the Ancient Scottish Spurtle. It pre-dates the spatula and most other kitchen utensils. Great for jellies, oatmeal, soups or anything else where you don't want to disturb the bottom of the pan. Each are about 8 to 12 inches long and are double handled so you can use it however you'd like! Comes with a free, traditional porridge recipe. |
|
|
|
| May be made from these or similar
woods ....
Hard Maple, White Oak, Cherry, Pecan |
|
| Item # Gob2C | |
 |
Goblets Each goblet is different. Sizes generally range from 8" to 12" tall and 2.5" to 4" wide. Styles are different too. We don't make just one type of goblet. Tell us what you'd like, and we can make it for you ... be it a "champaign glass" or "chunky wine" or chalice style. To the left is just a sample of the many styles made and woods that are used. This particular one is the "medieval chalice" style and made from Mesquite wood. |
 |
Gob2C-8 ... 8 oz Goblet
Each goblet is different. Dimension for this size of goblet is approximately 10" tall and 3" to 3.5" wide. Styles are different too. We don't make just one type of goblet. Tell us what you'd like, and we can make it for you ... by choosing the style below or contacting us and letting us make one exactly how you'd like it! To the left is an example of the "Chalice" style (very popular for medieval or renaissance festivals!) in this size.
|
NOTE: Before ordering, please know that the prices
listed are for goblets made from domestic (mostly USA) wood
species only. For exotic woods, please contact us and
we'll quote you a price and availability. If no choice of
wood is made, we'll choose a great one for you.
|
| Item # TankSW2 | |
|
|
Tankards - Solid wood Each one is different. Sizes generally range from 6" to 8" tall. You can also just tell us you'd like a 12 oz size and we'll make it to fit! Tell us what you'd like, and we can make it for you. We are one of the very few that make child-sized mugs/tankards! To the left you can see a custom made 40 oz monster of a tankard made from Zebrawood with a walnut bottom. While we can't make another one like it (it was an exclusive design of the owner), we can make one just as beautiful just for you.
|
| NOTE: Before ordering, please know that the prices listed are for vessels made from domestic (mostly USA) wood species only. For exotic woods, please contact us and we'll quote you a price and availability. If no choice of wood is made, we'll choose a great one for you. | |
TankCHILD - 6 oz
Wood Choice & Other comments
Price: $ 30.00 Quantity: Please Contact Us
|
|
|
|
| Item # DryRack |
 |
Drying Rack Standard size is 5 feet tall and 4 feet wide (when stretched out completely) but we can make it to whatever dimensions fit your needs. Made from cherry, oak, walnut or about any wood available.
|
|
| Price each: |
$ 150.00 |
|
| Please Specify....
Wood: We have a wide selection of woods, both domestic (maple, walnut, oaks, etc.) or exotic. |
||
| Item # StoolWoven2 |
|
Woven seat Stool Completely handmade in the traditional way with riven (not cut lumber) wood and shaped on a shavehorse and spring pole lathe. The seat is hickory bark strips that we cut from the hickory trees ourselves. Woods used for the stool frame is ash, walnut or white oak. 18" tall and 14" wide. Custom sizes are no problem. Just let us know your needs and we'll work out a price. |
|
| Price each: |
$ 175.00 |
|
| Please Specify....
Wood: We have a wide selection of woods, both domestic (maple, walnut, oaks, etc.) or exotic. |
||
| Item # LacePillowStand02 |
|
|
Lace Pillow Stand A very traditional design for your lace making pillows to rest upon while working. Lightweight yet sturdy and strong, this stand is made to travel to faires, club meetings or just simply be a beautiful addition to your sewing area. It folds up to almost flat to make storage and transport easier. Designed to fit pillows up to 24" diameter either with or without a center hole in the pillow. Easily adjusts in height to fit your chair. The wood for the feet is normally made from cedar ... a lightweight and weather resistant wood that allows for many years of ground contact at faire.
Note: Pillow not included. Pillow pictured made by our friend Dianne Taylor |
|
| Price each: |
$ 125.00 |
|
| Please Specify....
Wood: If you have a preference in woods used, please contact us and we'll discuss what we have available to suit your needs. |
||
| Item # SpoolAppleCore |
 |
Applecore style Spool 3" tall. Made on the lathe one at a time. Varnished and stained to give it that aged and authentic period look. |
|
| Price each: |
$ 10.00 |
|
| Item # BodgerShortBench |
 |
Short 'Bodger' Log Benches Made in the traditional "bodger" fashion, these rustic, handmade stools fit well either outside or inside. Made of local hardwoods such as cherry, walnut, sycamore, osage orange or any number of other trees. 'Short' just means taht they aren't over 24" wide. They are built to last through any weather or abuse. Strong and sturdy, they've been heavily treated with an outdoor resistant finish. There are NO nails, screws, glue, bolts or modern fixture in these. They're made with a mixture of green (wet) and dry pieces of wood and joined in the traditional manner with traditional tools by our very own Bodgers here. Custom orders are welcomed! Just contact us and we'll make what you'd like |
|
| Adults - Price each: |
$ 60.00 |
|
| Childs - Price each: |
$ 45.00 |
|
| Item # BodgerStool |
|
'Bodger' Stools Carved seat stool that feels absolutely comfortable to sit upon. If you've never sat in a handmade custom carved seat ... then you've never truly been sitting comfortably. The more you use these stools, the more solid they become because of how they're constructed. Completely handmade by us. There are NO nails, screws, glue, bolts or modern fixture in these. They're made with a mixture of green (wet) and dry pieces of wood and joined in the traditional manner with traditional tools by our very own Bodgers here. From the tree ... to this treasure. Custom orders are welcomed! Just contact us and we'll make what you'd like |
|
| Adults - Price each: |
$ 175.00 |
|
| Childs - Price each: |
$ 115.00 |
|
| Item # CampaignChair |
 Standard
|
The 'Campaign Chair',
X-chair, and also called a Tudor Chair A traditional folding chair used as far back as the 1400's and at least up through the Napoleonic Wars. Very sturdy and easily folded up. They look great and are a unique chair for kingdom or backyard. Custom orders are welcomed! Just contact us and we'll make what you'd like |
|
| Standard - Price each: |
$ 65.00 |
|
| ... and with a 'back' - Price each: |
$ 75.00 |
|
| Item # Traveling Chair |
|
|
Traveling or 'Camp' Chair A two-piece chair where the seat slides out and stores neatly behind the back of the chair. Easy to carry and very comfortable to relax in. Used in the middle ages up through today as a compact and easily stored chair. Perfect for the garden or camp site. Custom orders are welcomed! Just contact us and we'll make what you'd like |
|
| Standard - Price each: |
$ 60.00 |
|
| High Back - Price each: |
$ 75.00 |
|
| Note: Prices vary depending on type of wood used. The prices listed are for red oak chairs. Please contact us to get a price quote before ordering. | ||
