Tools & Accessories
We now accept
for retail orders
Item #: WTT-MiniScorp Proudly Made in the USA
Handmade, one at a time, from the design of the original tool of a master woodturner
Woodturners' Mini Scorp Tool This is one of those tools that a woodturning master had next to his lathe all of the time. It was the unsung hero and workhorse of generations of turners but is seldom, if ever, seen today. We've brought it back!
The hardened, polished steel "hook" of this tool is 1.5" long. The comfortable and strong wooden handle make it 7" long total. Comes with brass ferrule and choice of woods for the handle.
The unique hook design of this scorp is useful for large radius' and very small ones too. Just adjust how you hold the tool for the radius you're needing to work.
Price each:
$ 30.00
Please Specify.... Wood for handle (Ash, Walnut, Cherry ... Other woods may be extra)
AND
Left handed (for Left-handed use): WTT-MiniScorpL
or
Right handed (as shown above): WTT-MiniScorpR
Item #: WTA-TTBL03 3" Turntable Racer
Lazy Susan MechanismMake your own turntables by putting a small recess into the underside of your platter and attaching one of these in there. All metal construction for durability.
Price each:
$ 3.00
Item #: WTA-SHMST07 
The WRONG way to
hold this tool.
The WRONG way to
hold this tool.7" Interior Sanding Hemostat This is the hollowform turners' best friend! We all know how difficult it is to sand the interiors of many of our hollowforms. And we also know how much other people like to stick their fingers in there to see how smooth it is too, right !?
Well, this tool is a great way to get in there to sand without risking your fingers in the process. Simply clamp some foam with sandpaper wrapped around it (shown left) or use one of those foam sandpaper pads to reach down in there quickly and easily.
This Hemostat will easily reach 7" inside. Total length is 10".
Price each:
$ 6.00
Item #: WTA-HN10 1.25" x 8 TPI Hex Nut Here's a hex nut that will fit the spindle to the Jet 1642, Powermatic, and several other lathes that need the 1 1/4" x 8 TPI thread size.
You can make your own faceplates, chucks or whatever else you can dream up with these.
Price each:
$ 3.00
Item #: WTA-ICS02 & PZC02 
Ice cream Scoop & Pizza Cutter Hardware Make your own ice cream scoop or pizza cutter ! Just turn your own handles, drill a 3/8" wide hole about 1" deep and push these in there. You've got a custom made kitchen utensil for everyone to enjoy.
Price each:
$ 2.00
Please Specify.... Ice cream Scoop: WTA-ICS02
or
Pizza Cutter: WTA-PZC02
Item #: WTA-MCI12 Metal Candlestick Insert Top off your candlestick turnings with a polished metal insert. It's classy and functional as well. Requires a 3/4" wide and 3/8" deep hole.
Price each:
$ 0.25
Item #: WTA-MSM02 Mini Power Sanding Mandrel Only 1" wide, this is one of those tools that fits those hard to reach areas that just drive us woodturners nuts! It's great for smaller pieces but also for larger woodturnings where space is tight in some places.
The disk portion is hard, but still flexible, plastic. The shaft is 1/8" thick .... fits perfectly into the collet of a Dremel or drill chuck.
WTA-MSM02-A
Comes without the foam pad for....Price each:
$ 5.00
WTA-MSM02-B
Or complete with the foam pad and leather top ready to use....Price each: $ 7.00 Order Now
Item #: WTA-PFOCK23 Pre-filled Oil Candle Kit Oil candles are great gifts and craft show items! These are clear plastic with oil already added. They're disposable and not to be refilled. They last 20 hours and that's a long time, indeed. Just drill or hollow out a space for them and they're ready to go. No need for your customers to also purchase oil. And no chance of these shattering like the glass ones either.
Requires a 2.25 inch (2 1/4") hole as deep as you want.
Price each:
$ 2.00
Item #: WTA-HT Proudly Made in the USA
Woodturning Hook Tool One of the oldest types of woodturning tool, the hook tools are a mainstay of traditional (pole, treadle, etc.) lathing when hollowing anything. Sidegrain, endgrain, it doesn't matter.
But these tools are fantastic for modern, motored lathes as well! You'll get no better cut on endgrain with any other tool.
Lots of sizes and types listed below but we will work with you to create the perfect hook tool for your needs.
Made of the best toolsteel available!
WTA-HT-Modern
The hooks on these tools are generally a bit larger than on the traditional ones and angled a bit differently too.Choose a standard size below or let us know what size you need.
3/8" x 12" long - Unhandled
Price each:$ 40.00 1/2" x 16" long - Unhandled
Price each:$ 45.00 Add an Ash, Maple or Beech Handle
Price each:$10.00 WTA-HT-ModernSmall
Made to fit into all of the popular swivel-tip hollowing tools. Replace those scrapers with these and watch the shavings fly!Price each: $ 5.00
WTA-HT-Traditional
Specially designed for the pole, bow or treadle turner in mind by our very own bodger here. Generally smaller, thinner hooks than the modern ones so you can easily slice through the wood under your own power.Comes as a set (as pictured) or individually. The hook portion of the tool is polished but the rest of the shaft looks like an old-tyme tool.
Lots of sizes and types listed below but we will work with you to create the perfect hook tool for your needs.
Free online videos using the hook tool
An Inside and Outside set - 3/8" x 18" - Unhandled
Price:$ 80.00 An Inside and Outside set - 1/2" x 24" - Unhandled
Price:$ 100.00 Inside Only - 3/8" x 18" - Unhandled
Price each:$ 45.00 Inside Only - 1/2" x 24" - Unhandled
Price each:$ 55.00 Outside Only - 3/8" x 18" - Unhandled
Price each:$ 45.00 Outside Only - 1/2" x 24" - Unhandled
Price each:$ 55.00 Add an Ash, Maple or Beech Traditional Handle
Price each:$ 10.00 Order Now
Item #: WTA-CONEFILE 
Diamond Cone File This is a great little file to sharpen or hone your tools with. We recommend this diamond file to sharpen the hook tools above. We also use it to hone the inside flutes of most of our woodturning tools.
Price each:
$ 9.00
